Clamp Light Photography For Your IPhone Product Photos & Videos



Plop a flash on top of your camera and start firing away, and you're not likely to be accused of masterful lighting. Adaptable to cameras: With the ring light design, it's super easy to put your camera smack bang in the middle of the light which gives a lot more options for recording video. Simply put, constant LED or florescent lights, are not powerful enough to balance with the sun, let alone overpower the sun… but that's a topic for another time.

Shooting in mist and fog can take some practice to get right, but once you've mastered it, the light in this type of weather will enable you to capture spectacular shots with your iPhone. Particularly shiny objects, however, may create too much reflection for a ring flash to produce good results, and very flat relief may be lost unless the flash has separate bulbs that can be switched off to create somewhat more directional lighting.

Continuous lights, or hot lights”, that are either on or off are a go-to solution for those just beginning product photography. Catchlights are the spectral highlights in eyes created by the direct reflection of the key-light. The two flashes, set at different ratios, generate a natural-appearing light that brings out the details of the scales.

When getting started with ring light photography, you need to figure out whether you want to purchase a ring light or make one yourself. So the baking paper acts in the same way to soften the LED lights as they can be harsh when not defused properly. Back lighting is also the light direction that produces lens flare.

Because the flash is mounted on the lens and doesn't have to be set up separately, it's a convenient way to add enough light to allow smaller lens apertures for maximum depth of field, which is always a problem in extreme close-up situations. Then again, flash ring lights can also help you save power.

For the backlit setup, you will probably need to slow your shutter speed down a couple stops below your light meter's recommendation in order to overexpose the image. Some ring flashes have focusing lenses that result in ideal light distribution at a particular distance from the subject.

It's worth pointing out that sometimes you don't even need to adjust the lighting at all but just ask your subject to move and adjust their pose within it. Best YouTube Ring light In this instance, I've asked the model to turn further away from the light to join up the shadows, but I could just as easily of asked them to turn into the light to remove the offending shadow altogether.

When I was getting started in macro photography, I wanted a macro lighting system that gave me more control over the intensity and direction of the light, so I designed and manufactured the Lepp Macro Bracket, an on-camera system that held two flashes on short arms that could be easily articulated and positioned.

Read this article for a great guide to studio lighting for product photography. Find a way to diffuse the light that your onboard camera flash has. The combination of telephoto macro lens and two flashes on a bracket allowed me to move freely and to keep some distance between the camera and the very shy subject.

In the 3-point lighting image above, your key would be closer to 3:15 and your fill would be 8:45. They are great for filling shadows created by your main light. Photographers and videographers absolutely love ring lights as they offer more diffused lighting around the subject while reducing the appearance of harsh shadows, which is why it is a popular lighting tool for close-up portraiture.

Leave a Reply

Your email address will not be published. Required fields are marked *